How to choose a bouncy castle?

How to sew a bouncy castle?

Start repairing the bouncy castle. Stitch the tear as perfectly as possible with the needle. However, avoid hurting other parts of the lock with the needle. Then apply strong glue to the entire area and to the PVC part.

How to repair a hole in a bouncy castle? Strong adhesive A crack or hole must be repaired as soon as possible to stop the loss of air. The strong adhesive is the emergency solution to be able to enjoy the game again as soon as possible.

How to sew an inflatable?

The first step is to sew this cut with a needle and thread. The purpose of this process is not to seal the air leak, but to strengthen the area to prevent the problem from getting worse when you reinflate your structure.

How to find a hole in an inflatable?

Use a sponge soaked in soap. Rub it all over your mattress, then inflate the mattress. If little bubbles form, you've found the leak!

How to repair an inflatable?

However, for a heavier repair, you can purchase an inflatable repair kit. You can find adhesive bandages that do not require glue. Alternatively, you can also glue a piece of plastic.

How to repair an inflatable buoy?

Use glue to attach an inflatable buoy. Inflate your mattress a little and then apply glue to the hole and to an area of about 1 cm around the hole. Let it dry for about 10 minutes, then repeat the process 3 to 4 times.

How to repair a hole in an air mattress?

Cut a piece of patch larger than the hole. Remove the protective paper from the patch, leaving only the clear, self-adhesive material. Place the patch over the hole. Press the patch firmly and remove any air bubbles.

How to repair an inflatable?

If you find the damage while the bounce house is on the ground, you can use TPU tape to make a quick and easy repair.

How to repair inflatable games?

For a more resistant technique, the simple solution is to use a repair kit, e.g. B. Bicycle tire patches. Alternatively, if you have soft plastic nearby, you can improvise your own patch. In either case, your surface must be smooth.

How to repair an inflatable game?

The easiest way is to buy a patch at the store or cut a piece of an old buoy. Always take a patch that is much larger than your hole, coat the piece with glue (only special PVC neoprene glue otherwise you risk burning the corset) and place the piece in the hole.

How to sew a bouncy castle?

Also brush the glue onto the section of the inflatable where the patch will be placed. Heat both sections with the heat gun or hair dryer until the glue is tacky, then place the patch where you want it.

How to find a hole in an inflatable?

Use a sponge soaked in soap. Rub it all over your mattress, then inflate the mattress. If little bubbles form, you've found the leak!

How to repair a hole in a bouncy castle?

A crack or a hole must be sealed as soon as possible to stop the important air loss. High-adhesion glue is the emergency solution to get back in the game as quickly as possible. Make sure you have a high-performance glue that can seal every hole beforehand.

How to repair an inflatable?

If you find the damage while the bounce house is on the ground, you can use TPU tape to make a quick and easy repair.

Who offers a custom inflatable?

The Go-Up concept has been at the forefront of inflatables for over 20 years to help you organize events.

How to find a hole in a spa?

To do this, drain your spa, but not completely so that some air remains inside. Apply soapy water to the sides of your spa and immerse it in water: you'll know where the hole is when you see bubbles.

How do I patch a hole in a hot tub? Use the repair kit: it consists of a patch and a special strong glue that is applied directly to the hole. Start by spreading the glue over and around the hole, then apply the patch and hold for a few minutes.

How to find a flat tire on a spa?

A simple solution to locating a leak in your inflatable spa is to use a mixture of soapy water. When it comes in contact with the hole, it will emit soap bubbles that will tell you exactly where the hole is.

How do you re-inflate a filled spa?

How do I inflate a filled spa? Finally, connect the inflation hose from the control panel to the tank (as you did the very first time) and press the "Bubbles" button to inflate the tank or cover it up a bit.

How to find a leak in a hot tub?

To do this, the spa must first be partially drained. It is important that there is still air in the spa. Next, apply soapy water to the walls, then immerse the spa in water. Air bubbles should escape from the area where the leak is located.

How to find the leak on a spa?

To do this, the spa must first be partially drained. It is important that there is still air in the spa. Next, apply soapy water to the walls, then immerse the spa in water. Air bubbles should escape from the area where the leak is located.

Why is my spa losing water?

This loss is normal and is usually caused by the inlet and outlet of the spa and of course evaporation. If you notice that the water level is continually dropping even though the cover is closed and you are not using the spa, it is a sign of a leak.

How do I repair a hole in an Intex inflatable spa?

What glue should I use to repair an inflatable spa?

For this, you need the famous "blue glue" of the spa, a glue developed for swimming pools and perfectly waterproof once dry.

How do I find an air leak in an inflatable spa?

A simple solution to locating a leak in your inflatable spa is to use a mixture of soapy water. When it comes in contact with the hole, it will emit soap bubbles that will tell you exactly where the hole is.

How do you find a hole in an inflatable pool? The most common technique for finding a hole in an inflatable pool, also used for bicycle tires, is to use soapy water which, when in contact with the air, creates bubbles at the location of the leak.

How do I know if my spa is leaking?

One way to find a leak in the bowl is to sprinkle a little food coloring into the spa water and see where the colored water goes. The leak is confirmed by the presence of the dye on the outside of the spa shell.

Why is my spa losing water?

This loss is normal and is usually caused by the inlet and outlet of the spa and of course evaporation. If you notice that the water level is continually dropping even though the cover is closed and you are not using the spa, it is a sign of a leak.

How do I know if my spa is filtering properly?

The duration of the daily filtration: it must be adapted to the water temperature. There is a rule: The filtration time in hours is equal to the water temperature divided by 2. With a water temperature of 28°C, the spa must be filtered 14 hours per day. Above 30°C, the filtration must run 24 hours a day.

How do I repair a hole in an Intex inflatable spa?

What glue should I use to repair an inflatable spa?

For this, you need the famous "blue glue" of the spa, a glue developed for swimming pools and perfectly waterproof once dry.

How to deflate an inflatable?

Steps to deflate and fold the "Merlin" inflatable (Part 2)

• 1/ Stop the fan: press the 0 position of the switch.
• 2/ Open the 2 zippers: one on the drop zone side, the other on the back of the structure.
• 3/ Open the hoses (the one attached to the blower and the one closed)

How do I inflate a bouncy castle? Your inflatable will be delivered folded. You must therefore put it on the tarp before inflating it and setting it up. Be careful to place the inflation sleeve towards the edge of the tarp, otherwise you risk getting stuck when inflating.

How does an inflatable work?

Assembling an inflatable game. Connect the handle to the fan. Attach the fan and connect it to an electrical installation (220 V/16 A) with ground according to the current standards. Protect access to the electricity and the motor from the public. The fan operates continuously.

How to fold an inflatable game?

How to fold your inflatable game Make sure all zippers are open. 2) Walk (sock) over the game to deflate it, starting with the ends and ending with the sleeves. 3) When the game is flat, fold the sides and walk on them to release any remaining air.

How do I know if my spa is leaking?

One way to find a leak in the bowl is to sprinkle a little food coloring into the spa water and see where the colored water goes. The leak is confirmed by the presence of the dye on the outside of the spa shell.

Why is my spa losing water? This loss is normal and is usually caused by the inlet and outlet of the spa and of course evaporation. If you notice that the water level is continually dropping even though the cover is closed and you are not using the spa, it is a sign of a leak.

How do I know if my spa is filtering properly?

The duration of the daily filtration: it must be adapted to the water temperature. There is a rule: The filtration time in hours is equal to the water temperature divided by 2. With a water temperature of 28°C, the spa must be filtered 14 hours per day. Above 30°C, the filtration must run 24 hours a day.

Why has my spa stopped filtering?

The problem may be with the filter cartridge. Run the spa for 24 hours without this filter. If this works, the filter cartridge should be cleaned or replaced.

How long should a spa be filtered for?

Example: Water temperature is 28°C, you need to filter 14 hours a day. When the water temperature is above 30°C: no need to calculate, we recommend you to filter the inflatable spa continuously 24 hours a day.