How to remove a clearomizer ?

E-cigarette locked: the switch button, this savior Before panicking, make sure you have turned on and unlocked your e-cigarette. To do this, simply press three or five times very quickly on the button of your mod (it varies by model).

How to make a good resistance?

To restore your stamina, you need :

• A coil of resistive wire (kanthal for example)
• Fiber (silica, cotton, cellulose)
• A template (screwdriver or microcoil rod)
• A measuring tool (ohmmeter or electronic mod)
• An Allen key or a Phillips screwdriver depending on the atomizer.
• Cutting pliers and scissors.

How to build your own resistors ? Tools to make your wicks and resistors A tool to make your coils of different diameters (usually 2mm/2.5mm/3mm minimum). Precision cutters to cut your coils flush with the board. A pair of ceramic tweezers or a pair of ceramic tweezers that will serve you for everything. Replace your bobbin, your cotton...

How to make a resistance?

To make your resistor, or coil, you need two essential elements: cotton and resistive wire. This represents a low cost of purchase and allows you to have consumables longer. The cotton: it is the consumable which will allow the absorption of your liquid.

How to make your own coil?

To make a can, you need a few tools, which you probably already have at home: 1 pair of wire cutters, 1 pair of flat nose pliers, screwdrivers. At least that. The most important thing is to be 100% sure of the diameter of the tool that will be used to wind the resistive wire.

How to make a 12v heater ?

We scrape off the varnish from the resistive wire and solder these wires at each end. one side to the 12v socket, the other to the electrical return wire that comes back to the other terminal of the 12v socket (indifferent direction of connection). and we extend the cover to hide the side soldering of the pipe and drill into the socket.

How to properly soak your resistance?

Soaking the cotton starts your electronic cigarette resistance. When its resistance is new, the cotton is really dry. By putting drops on it, you simply prevent it from burning during the first heating. You will simply need to check that all the cotton is prepared.

Why did my resistance burn out quickly?

An incorrectly adjusted battery. Each resistor has a power rating (expressed in Watts) that must be adjusted for optimal use. Below the recommended wattage, the resistor can leak. If it is used on top, it vaporizes the liquid very quickly and gives it that famous burnt taste.

How to soak the resistance of an electronic cigarette?

The preparation of an e-cigarette coil is simply to soak the cotton with e-liquid. In fact, when its resistance is new, the cotton is dry. The immersion in the e-liquid moistens and avoids burns during the first use.

How to start your resistance?

The fact of priming its resistance consists, no more and no less, in wetting the cotton which wraps the wire that heats and allows the vaporization. When its resistance is new, the cotton is really dry. By putting drops on it, you simply avoid that it burns during the first heating.

Why am I inhaling E-liquid? A clogged or flooded resistor can be the cause of an e-liquid rise. Check the amount of propylene glycol and vegetable glycerin in your e-liquid. A high proportion of propylene glycol can make your liquid a little too liquid.

How not to burn out your resistance?

The vegetable glycerin will promote the steam and density. Many VG are not compatible with all clearomizers because this is what makes the liquid "fat". Thus, depending on the openings and capillarity - density of the cotton - of its resistance, a fat e-liquid will have difficulty in circulating effectively.

How not to damage its resistance?

To increase the life of your resistor, it is also important to respect the 10-second pause time between inhalations. This allows the resistor to cool down and not overheat. Overheating is a common cause of premature wear and tear.

How to properly soak your resistance?

Soaking the cotton starts your electronic cigarette resistance. When its resistance is new, the cotton is really dry. By putting drops on it, you simply prevent it from burning during the first heating. You will simply need to check that all the cotton is prepared.

Why check atomizer ?

The Check messages of the atomizer therefore signal a bad behavior of the resistance that can: receive a lot of energy and heat aggressively and very quickly, or receive only a very small dose of electricity that can not burn the wick and therefore no steam.

Why can't I pull my e-cigarette out? If you can not pull the e-cigarette or if the vaporizer is clogged, check the drip tip. Indeed, if you are used to put your vape in your pocket or bag, some impurities can settle inside and clog it.

Why does my Ce say Check atomizer?

This message is displayed when the electronic cigarette does not detect the clearomizer (or the resistance). The first thing to check when your e-cigarette displays "Check Atomizer" is to check that the connection is well made between your box or battery and the clearomizer.

Why does my electronic cigarette say Short atomizer?

One of the messages that an e-cig can display is "short atomizer". But what does it mean? Its meaning is simple. Your vapoteur indeed warns you that the resistance of the atomizer or dripper is poorly designed or that the contact of the atomizer with the battery is failing.

How to remove check atomizer?

In the case of a "check atomizer", the box no longer recognizes the tank. You just have to unscrew the atomizer of your mod and clean the contact pad on the box but also the screw on the tank.

How to remove the no atomizer?

Solution 1 : Loosen slightly your atomizer, the pin is not blocked and the connection is better, no more error message. Solution 2: Nothing to do, even by unscrewing your spray, it remains locked. You will have to replace the connection block of your vaporizer on its axis to make it rise.

What is an atomizer?

Upper part of an electronic cigarette where the resistance is installed (metal wire that will heat the cotton impregnated with liquid) where the vaporization of the e-liquid takes place. An atomizer can be removable from the battery, it is made of metal, plastic, glass.

How to unlock electronic cigarette Vaporesso?

Unlock: Press and hold the mode button and the " " button simultaneously for 2 seconds, the words "System Unlock" will appear on the screen, and the " " and " - " buttons will be active again.

How to reset a Vaporesso?

How to set up the Vaporesso GEN kit Reset existing settings: When a tank is installed, the resistor material and wattage are automatically identified. Press the up ( ) button to reset them (press the - button to use the existing settings.

How to unlock Geekvape?

To lock/unlock the case, press and hold the / - buttons simultaneously. This ability to lock or unlock your Geek Vape Aegis is very useful when carrying it. It will prevent you from inadvertently changing your vaping settings.

What is an atomizer?

Upper part of an electronic cigarette where the resistance is installed (metal wire that will heat the cotton impregnated with liquid) where the vaporization of the e-liquid takes place. An atomizer can be removable from the battery, it is made of metal, plastic, glass.

What is the difference between an atomizer and a Clearomizer?

A clearomizer uses pre-assembled resistors. On the contrary, the atomizer allows the manufacture of its own resistance. There is a difference between a clearomizer and an atomizer. We also talk about a rebuildable atomizer in the case of the second.

How does the atomizer work?

The mode of operation is similar. The role of the atomizer is to store the e-liquid, heat it and vaporize it to allow the vapor to be inhaled. To do this, the atomizer uses, like the clearomizer, a resistance. Unlike the clearo, the act allows the creation of a resistance house.

How to reset an electronic cigarette?

C - The battery of my electronic cigarette is defective 2) Remember to unlock the battery by pressing 5 times in succession. The 5 successive presses are the battery ON / OFF. You press 5 times it lights up, you press again 5 times and it turns off.

How to unlock an electronic cigarette? Before panicking, make sure you have turned on and unlocked your e-cigarette. To do this, simply press three or five times very quickly on the button of your mod (this varies depending on the model). Also perform this gesture to turn off your electronic cigarette.

How to know if the battery of my electronic cigarette is out of order?

An electronic cigarette battery that is out of order no longer works. It no longer lights up when you press the switch button 5 times and your OLED screen remains black. It does not respond to any external stimulus. When it is completely discharged, the battery can no longer power the vapoteur.

How do I know if the batteries are dead?

Testing the batteries with a voltmeter First, let's test the voltage of these cells with the multimeter. It's 1.5V, 1.2V... goes down too fast, which means that this battery is dead or damaged.

Why doesn't my VAPE charge?

The origin of a vape that no longer charges Here are 3 possible reasons why your e-cigarette no longer charges: Poor maintenance of your vapoteur. Poor use of your vape. A worn out battery.

How does the atomizer work?

The mode of operation is similar. The role of the atomizer is to store the e-liquid, heat it and vaporize it to allow the vapor to be inhaled. To do this, the atomizer uses, like the clearomizer, a resistance. Unlike the clearo, the act allows the creation of a resistance house.

What is an atomizer? Upper part of an electronic cigarette where the resistance is installed (metal wire that will heat the cotton impregnated with liquid) where the vaporization of the e-liquid takes place. An atomizer can be removable from the battery, it is metal, plastic, glass.

What is a rebuildable atomizer?

A rebuildable atomizer (also called "repairable" or simply "atomizer") is an alternative to the classic clearomizer that you already know well. Like it, the atomizer contains a resistor and e-liquid, and is connected to a mod to heat up.

What is the difference between an atomizer and a Clearomizer?

In the lexicon of vape, the clearomizer is distinguished from the atomizer. A clearomizer uses pre-assembled resistors. In contrast, the atomizer allows the manufacture of its own resistance. There is a difference between a clearomizer and an atomizer.

Why switch to rebuildable?

Why switch to rebuildable equipment? You are no longer obliged to buy resistances indefinitely (whose lifespan can be very random). Because vape in rebuildable material is not exactly identical to a clearomizer lambda.

How do I know if the battery of my electronic cigarette is dead?

An electronic cigarette battery that is out of order no longer works. It no longer lights up when you press the switch button 5 times and your OLED screen remains black. It does not respond to any external stimulus. When it is completely discharged, the battery can no longer power the vapoteur.

What is the life span of an electronic cigarette battery? The battery of your electronic cigarette has a lifespan of about 300 cycles. It is therefore an element that can not be used indefinitely. On the other hand, it is possible to preserve the battery and therefore to be able to use it on the long term.

When to change the battery of an electronic cigarette?

An electronic cigarette battery is changed approximately every 300 cycles. It really depends on the model of the vapoteur. The life of a battery or accumulator is limited. With use, the device wears out, loses its autonomy and stops working.

How to change a battery?

The battery(ies): easy replacement The procedure is very simple. Simply open the trapdoor from your location. The position of this trapdoor varies according to the models, but most of the time you will find it under the e-cigarette.

What is a battery?

battery n.m. Colloquial abbreviation for electric storage battery.

Why my electronic cigarette does not charge anymore?

Here are 3 possible reasons why your e-cigarette no longer charges: Poor maintenance of your vaping device. Poor use of your vape. A worn out battery.

How to reset an electronic cigarette?

If the short circuit is still present, replace the resistor with a new one. To reset your battery after a short circuit, connect it to the charger for a few minutes to get it working again.

How do I know if the batteries are dead?

Testing the batteries with a voltmeter First, let's test the voltage of these cells with the multimeter. It's 1.5V, 1.2V... goes down too fast, which means that this battery is dead or damaged.

How long does a lithium battery last?

"Batteries can be used for anywhere from 5 to 20 years, depending on many factors," says Professor Mikael G. Cugnet, who led the study. "This is good news when many estimate the average lifespan to be 8 years.

When to change the batteries ?

A variable lifespan Like many batteries, our dear companions that power our e-cigarettes have a limited lifespan. After some research with various manufacturers, we quickly discovered that a battery can withstand between 300 and 500 cycles of charge!